Mitutoyo Digimatic Carbon Fiber Caliper, Series 552, 0(20)-1500mm – 552-305-10
This is a lightweight standard model of Digimatic caliper with steel jaws.
It offers you the following benefits:
- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
Technical Data:
| Range |
0(20)-1500mm |
| Inside measuring from |
20.1 mm |
| Accuracy |
0.09 mm |
| Mass |
2160 g |
| Digital step |
0,01 mm |
| Display |
LCD, Character Height 10 mm |
| Max. response speed |
Unlimited |
| Battery life |
approx. 5000 hours |
| Delivered |
In a case, including 1 battery |
| Data output |
Yes |
| ORIGIN (ABS-Zero) |
Yes |
| OFFSET |
Yes |
| PRESET |
Yes |
| Low voltage alarm |
Yes |
| DATA (output with cable) / HOLD (display value) |
Yes |
| Digital/Analog |
Digital |
| Inch-Metric |
Metric |
| Remarks |
– |
| L |
1740 mm |
| a |
150 mm |
| b |
24 mm |
| c |
62.8 mm |
| d |
113.8 mm |
| e |
32 mm |
| f |
10 mm |
Optional Accessories:
- 05CZA624:SPC cable with data switch(40″ / 1m)
- 05CZA625:SPC cable with data switch (80″ / 2m)
- 914055: Centerline attachments (mm)*
- 914056: Centerline attachments (inch)*
- 914057: Pointed ID measuring attachments (mm)*
- 914058: Pointed ID measuring attachments (inch)*
- 914053: Attachment clamps (for models up to 600mm/24″ range)
- 914054: Attachment clamps (for models over 600mm/24″ range)
* Attachment clamps are required and not available for long jaw type
See all Mitutoyo Digimatic Carbon Fiber Calipers, Series 552 with Optional Jaw Attachments
Reviews
There are no reviews yet.