Suburban Permanent Magnetic Chuck, Fine Pole, 4″ x 4″ – MC-44-FP-S0

• Models with the suffix “S0, S1 or S2” are part of the SineSet System. The chucks are designed to bolt directly, with little or no indicating, to a SineSet sine plate or compound sine plate of the same size and series to form a magnetic sine plate or magnetic compound sine plate.
• Can be used alone as a parallel chuck. The 4″ x 4″, 6″ x 6″ and 9″ x 9″ models can be used as squaring chucks.
• Made with ceramic magnets for superior holding power.
• Chucks are lubricated and sealed against dirt and liquids.
• Includes handle, side and back rails.
• 12″ x 12″ models & larger have a non-removable handle.
• Made in the U.S.A.

STANDARD POLE: 1/4″ poles and 1/8″ separators produce deep flux lines for holding large and thick parts.

FINE POLE (marked -FP): 1/8″ poles and 1/8″ separators produce shallow flux lines for holding small and thin parts.

Specifications:

MODEL # POLE SPACING SineSet
SERIES LENGTH WIDTH HEIGHT SQUARE
& PARALLEL WEIGHT MC-44-FP-S0 FINE S0 4″ 4″ 2-5/8″ 0.0002″ 12 lbs. MC-66-S1 STANDARD S1 6″ 6″ 2-5/8″ 0.0002″ 21 lbs. MC-66-FP-S1 FINE S1 6″ 6″ 2-5/8″ 0.0002″ 25 lbs. MC-612-S2 STANDARD S2 12″ 6″ 2-5/8″ 0.0003″ 42 lbs. MC-612-FP-S2 FINE S2 12″ 6″ 2-5/8″ 0.0003″ 47 lbs. MC-618-S2 STANDARD S2 18″ 6″ 2-5/8″ 0.0003″ 65 lbs. MC-618-FP-S2 FINE S2 18″ 6″ 2-5/8″ 0.0003″ 70 lbs. MC-812-S2 STANDARD S2 12″ 8″ 2-5/8″ 0.0003″ 58 lbs. MC-812-FP-S2 FINE S2 12″ 8″ 2-5/8″ 0.0003″ 63 lbs. MC-1212-S2 STANDARD S2 12″ 12″ 2-5/8″ 0.0003″ 100 lbs. MC-1212-FP-S2 FINE S2 12″ 12″ 2-5/8″ 0.0003″ 106 lbs. MC-1218-S2 STANDARD S2 18″ 12″ 2-5/8″ 0.0004″ 151 lbs. MC-1218-FP-S2 FINE S2 18″ 12″ 2-5/8″ 0.0004″ 160 lbs. MC-1224-S2 STANDARD S2 24″ 12″ 2-5/8″ 0.0004″ 202 lbs. MC-1224-FP-S2 FINE S2 24″ 12″ 2-5/8″ 0.0004″ 212 lbs.

See all Suburban Permanent Magnetic Sine Plate & Squaring Chucks